• AT815ST  Stereo Shotgun  Condenser Cardioid/Figure 8
30Hz-20kHz HPF 48V 200 Ohm MS+L/R Switching 380mm

The AT815ST has been updated with the BP4027

At 380.0 mm in length, the AT815ST is engineered for long-distance pickup in broadcasting and film/TV production. The AT815ST features internal matrixing innovations that allow for professional quality stereo audio with or without an external matrix. Its compact, lightweight design is perfect for camera-mount use. The AT815ST also features switchable low-frequency roll-off and independent line-cardioid and figure-of-eight condenser elements.


ELEMENTS Fixed-charge back plate permanently polarized condenser
POLAR PATTERNS Line-cardioid and figure-of-eight
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY –30 dB (31.6 mV) / (Mid / Side / LR Stereo) –34 dB (19.9 mV) / –36 dB (15.8 mV) re 1V at 1 Pa*
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 123 dB / 127 dB / 126 dB SPL, (Mid / Side / LR Stereo) 1 kHz at 1% T.H.D.
SIGNAL-TO-NOISE RATIO1 72 dB / 68 dB / 70 dB SPL, (Mid / Side / LR Stereo) 1 kHz at 1 Pa*
DYNAMIC RANGE (typical) 101 dB / 101 dB / 102 dB, (Mid / Side / LR Stereo) 1 kHz at Max SPL
PHANTOM POWER 11-52V DC, 4 mA typical at 48V,
REQUIREMENTS each channel
SWITCHES M-S, LR Stereo-Wide (LR-W), LR Stereo-Narrow (LR-N); Flat, roll-off
WEIGHT (less accessories) 5.0 oz
DIMENSIONS 380.0 mm long, 21.0 mm diameter
OUTPUT CONNECTOR Integral XLR5M-type
CABLE Dual 0.61 m shielded two-conductor, terminated in two XLR3M-type connectors
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8in-27 threaded stands; AT8135 foam windscreen; protective carrying case

Write a review

Please login or register to review

AT815ST Stereo Shotgun Condenser Cardioid/Figure 8

  • $1,190.00
  • $690.00


Tags: AT815ST, Stereo, Shotgun, Condenser, Cardioid, Figure