• AT4049B  Studio Mic  Small Diaphragm  Condenser Omni
20Hz-20kHz HPF 48V 100 Ohm Other Capsules

Recommended for professional recording and critical applications in broadcast, this versatile microphone may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

The AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b-EL) and hypercardioid (AT4053b-EL).

Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement

Omnidirectional polar pattern provides maximum ambient pickup

Direct-coupled, balanced output results in a clean signal even under high-output conditions

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

Switchable 80 Hz hi-pass filter and 10 dB pad

Rugged turned-brass microphone housing for enduring dependability

State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards

RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

ELEMENT Externally polarized (DC bias) capacitor
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 50 ohms
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
NOISE 16 dB SPL
DYNAMIC RANGE (typical) 129 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 78 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 4.8 mA typical
SWITCH Flat, roll-off; 10 dB pad (nominal)
WEIGHT 130 g
DIMENSIONS 155.0 mm long, 21.0 mm maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
OPTIONAL INTERCHANGEABLE ELEMENTS AT4051b-EL (cardioid); AT4053b-EL (hypercardioid)
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8in-27 threaded stands; windscreen; protective carrying case

Write a review

Please login or register to review

AT4049B Studio Mic Small Diaphragm Condenser Omni

  • $1,290.00


Tags: AT4049B, Studio, Mic, Small, Diaphragm, Condenser, Omni